<?xml version="1.0" encoding="UTF-8"?><metadata>
<Esri>
<CreaDate>20250324</CreaDate>
<CreaTime>08315800</CreaTime>
<SyncOnce>TRUE</SyncOnce>
<SyncDate>20220106</SyncDate>
<SyncTime>12592100</SyncTime>
<ModDate>20230322</ModDate>
<ModTime>16365200</ModTime>
<DataProperties>
<itemProps>
<itemName Sync="TRUE">bndMetaTemplate</itemName>
<nativeExtBox>
<westBL Sync="TRUE">66549.085200</westBL>
<eastBL Sync="TRUE">80101.590200</eastBL>
<southBL Sync="TRUE">2573504.233400</southBL>
<northBL Sync="TRUE">2598071.735900</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
<imsContentType Sync="TRUE" export="False">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Meter (1.000000)</csUnits>
<projcsn Sync="TRUE">USA_Contiguous_Albers_Equal_Area_Conic_USGS_version</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.8'&gt;&lt;WKT&gt;PROJCS[&amp;quot;USA_Contiguous_Albers_Equal_Area_Conic_USGS_version&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Albers&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,0.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-96.0],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,29.5],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,45.5],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,23.0],UNIT[&amp;quot;Meter&amp;quot;,1.0],AUTHORITY[&amp;quot;Esri&amp;quot;,102039]]&lt;/WKT&gt;&lt;XOrigin&gt;-16901100&lt;/XOrigin&gt;&lt;YOrigin&gt;-6972200&lt;/YOrigin&gt;&lt;XYScale&gt;10000&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;10000&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.001&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102039&lt;/WKID&gt;&lt;LatestWKID&gt;102039&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
<ArcGISProfile>ISO19139</ArcGISProfile>
<scaleRange>
<minScale>250000</minScale>
<maxScale>24000</maxScale>
</scaleRange>
</Esri>
<mdLang>
<languageCode value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdChar>
<CharSetCd value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd value="005"/>
</mdHrLv>
<mdContact>
<rpIndName>Steve Nechero</rpIndName>
<rpOrgName>U.S. Department of Agriculture, Natural Resources Conservation Service, National Cartography and Geospatial Center</rpOrgName>
<rpPosName>Cartographer, Technology Applications Team Lead</rpPosName>
<rpCntInfo>
<cntPhone>
<voiceNum>817-509-3366</voiceNum>
<faxNum>817-509-3469</faxNum>
</cntPhone>
<cntAddress addressType="postal">
<delPoint>501 W. Felix St., Bldg. 23</delPoint>
<city>Fort Worth</city>
<adminArea>TX</adminArea>
<postCode>76115</postCode>
<country>US</country>
<eMailAdd>Steve.Nechero@ftw.usda.gov</eMailAdd>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="007"/>
</role>
</mdContact>
<mdStanName>ArcGIS Metadata</mdStanName>
<mdStanVer>1.0</mdStanVer>
<distInfo>
<distributor>
<distorCont>
<editorSource>external</editorSource>
<editorDigest>cffc1cfbe51acd03247503d7ecba783e</editorDigest>
<rpIndName>ACPF Support</rpIndName>
<rpOrgName>ACPF National Hub</rpOrgName>
<rpPosName>Database Manager</rpPosName>
<rpCntInfo>
<cntAddress addressType="both">
<delPoint>613 Morrill Rd, 218 Durham Center</delPoint>
<city>Ames</city>
<adminArea>Iowa</adminArea>
<postCode>50011</postCode>
<eMailAdd>acpfsupport@iastate.edu</eMailAdd>
<country>US</country>
</cntAddress>
</rpCntInfo>
<editorSave>True</editorSave>
<displayName>ACPF Support</displayName>
</distorCont>
</distributor>
<distFormat>
<formatName Sync="TRUE">File Geodatabase Feature Class</formatName>
<formatVer>10.8.1</formatVer>
</distFormat>
</distInfo>
<dataIdInfo>
<idCitation>
<resTitle Sync="FALSE">ACPF Watershed Boundary</resTitle>
<date>
<pubDate time="unknown">2009-01-01</pubDate>
</date>
<citRespParty>
<rpOrgName>U.S. Department of Agriculture, Natural Resources Conservation Service, National Cartography and Geospatial Center</rpOrgName>
<rpCntInfo>
<cntAddress>
<delPoint>Fort Worth, Texas</delPoint>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>U.S. Department of Agriculture, Natural Resources Conservation Service, National Cartography and Geospatial Center</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<presForm>
<PresFormCd value="005"/>
</presForm>
<presForm>
<fgdcGeoform>vector digital data</fgdcGeoform>
</presForm>
<citRespParty>
<rpIndName>ACPF Support</rpIndName>
<rpOrgName>ACPF National Hub</rpOrgName>
<rpPosName>Database Manager</rpPosName>
<role>
<RoleCd value="007"/>
</role>
<rpCntInfo>
<cntAddress addressType="both">
<delPoint>613 Morrill Rd, 218 Durham Center</delPoint>
<city>Ames</city>
<adminArea>Iowa</adminArea>
<postCode>50011</postCode>
<eMailAdd>acpfsupport@iastate.edu</eMailAdd>
<country>US</country>
</cntAddress>
</rpCntInfo>
<displayName>ACPF Support</displayName>
</citRespParty>
</idCitation>
<idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;This watershed boundary feature class has been assembled to support agricultural conservation planning. The original data used to create this database are the Watershed Boundary Dataset (WBD) for the three individual states. The majority of the metadata found herein pertains to the Watershed Boundary Dataset (WBD) and has been modified only to reflect the repurposing of the data in its aggregated form. Watershed boundaries are updated annually to match boundaries supplied by the WBD in the first quarter of the update year.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the entire United States. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3" (04/01/2009). http://www.ncgc.nrcs.usda.gov/products/datasets/watershed/index.html . Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
<idPurp>The Watershed and Subwatershed hydrologic unit boundaries provide a uniquely identified and uniform method of subdividing large drainage areas. The smaller sized 6th level sub-watersheds (up to 250,000 acres) are useful for numerous application programs supported by a variety of local, State, and Federal Agencies. This data set is intended to be used as a tool for water-resource management and planning activities, particularly for site-specific and localized studies requiring a level of detail provided by large-scale map information. The dataset is seamless and, for the most part, a nationally consistent geospatial database.</idPurp>
<idCredit>Funding and support for the Watershed Boundary Dataset (WBD) were provided by the Natural Resources Conservation Service, the Environmental Protection Agency, and the United States Geological Survey. Representatives from the U.S. Geological Survey and Environmental Protection Agency contributed a substantial amount of time and salary towards quality review and updating of the dataset in order to meet the Federal Standards for Delineation of Hydrologic Unit Boundaries.</idCredit>
<idStatus>
<ProgCd value="001"/>
</idStatus>
<resMaint>
<maintFreq>
<MaintFreqCd value="011"/>
</maintFreq>
</resMaint>
<placeKeys>
<keyword>United States of America</keyword>
<keyword>United States</keyword>
<keyword>USA</keyword>
</placeKeys>
<themeKeys>
<keyword>HUC</keyword>
<keyword>Watershed Boundary Dataset</keyword>
<keyword>Sub-region</keyword>
<keyword>Subwatershed</keyword>
<keyword>HUC12</keyword>
<keyword>Hydrologic Unit Code</keyword>
<keyword>Hydrologic Units</keyword>
<keyword>WBD</keyword>
<keyword>Watershed</keyword>
<keyword>Watershed Boundaries</keyword>
<keyword>Sub-basin</keyword>
<keyword>Basin</keyword>
<keyword>boundaries</keyword>
<keyword>Region</keyword>
</themeKeys>
<themeKeys>
<thesaName>
<resTitle>ISO 19115 Topic Categories</resTitle>
</thesaName>
<keyword>boundaries</keyword>
</themeKeys>
<searchKeys>
<keyword>HUC</keyword>
<keyword>Watershed Boundary Dataset</keyword>
<keyword>United States of America</keyword>
<keyword>Sub-region</keyword>
<keyword>United States</keyword>
<keyword>Subwatershed</keyword>
<keyword>HUC12</keyword>
<keyword>Hydrologic Unit Code</keyword>
<keyword>Hydrologic Units</keyword>
<keyword>WBD</keyword>
<keyword>Watershed</keyword>
<keyword>boundaries</keyword>
<keyword>Watershed Boundaries</keyword>
<keyword>Sub-basin</keyword>
<keyword>USA</keyword>
<keyword>Basin</keyword>
<keyword>boundaries</keyword>
<keyword>Region</keyword>
<keyword>USDA/ARS</keyword>
<keyword>Agricultural Conservation Planning Framework</keyword>
<keyword>ACPF</keyword>
</searchKeys>
<resConst>
<LegConsts>
<useLimit>The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate uses described in this metadata document. It is strongly recommended that this data is directly acquired from the distributor and not indirectly through other sources which may have changed the data in some way. These data should not be used at scales greater than 1:24,000 for the purpose of identifying hydrographic watershed boundary feature locations in the U.S.A. The U.S. Department of Agriculture makes no claims for the data's suitability for other purposes. U.S. Department of Agriculture should be acknowledged as the data source in products derived from these data. The Watershed Boundary Dataset is public information and may be interpreted by all organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application of the data. Federal, State, or local regulatory bodies are not to reassign to the U.S. Department of Agriculture or the Natural Resources Conservation Service any authority for the decisions they make. The Natural Resources Conservation Service will not perform any evaluations of these maps or purposes related solely to State or local regulatory programs. Photographic or digital enlargement of these maps to scales greater than that at which they were originally delineated can result in misrepresentation of the data. If enlarged, the maps will not include the fine detail that would be appropriate for mapping at the small scale. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data from the source distributor.</useLimit>
</LegConsts>
</resConst>
<resConst>
<Consts>
<useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate uses described in this metadata document. It is strongly recommended that this data is directly acquired from the distributor and not indirectly through other sources which may have changed the data in some way. These data should not be used at scales greater than 1:24,000 for the purpose of identifying hydrographic watershed boundary feature locations in the U.S.A. The NRCS should be acknowledged as the data source in products derived from these data. The Watershed Boundary Dataset is public information and may be interpreted by all organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application of the data. Federal, State, or local regulatory bodies are not to reassign to the Natural Resources Conservation Service any authority for the decisions they make. The Natural Resources Conservation Service will not perform any evaluations of these maps or purposes related solely to State or local regulatory programs. Photographic or digital enlargement of these maps to scales greater than that at which they were originally delineated can result in misrepresentation of the data. If enlarged, the maps will not include the fine detail that would be appropriate for mapping at the small scale. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data from the source distributor.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
</Consts>
</resConst>
<spatRpType>
<SpatRepTypCd value="001"/>
</spatRpType>
<dataLang>
<languageCode value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<dataExt>
<geoEle>
<GeoBndBox>
<westBL>-91.761608</westBL>
<eastBL>-91.585877</eastBL>
<southBL>42.953066</southBL>
<northBL>43.039376</northBL>
</GeoBndBox>
</geoEle>
</dataExt>
<dataExt>
<exDesc>publication date</exDesc>
<tempEle>
<TempExtent>
<exTemp>
<TM_Period>
<tmBegin>1980-01-01T00:00:00</tmBegin>
<tmEnd date="unknown"/>
</TM_Period>
</exTemp>
</TempExtent>
</tempEle>
</dataExt>
<envirDesc Sync="TRUE"> Version 6.2 (Build 9200) ; Esri ArcGIS 10.8.1.14362</envirDesc>
<idPoC>
<rpIndName>Steve Nechero</rpIndName>
<rpOrgName>U.S. Department of Agriculture, Natural Resources Conservation Service, National Cartography and Geospatial Center</rpOrgName>
<rpPosName>Cartographer, Technology Applications Team Lead</rpPosName>
<rpCntInfo>
<cntPhone>
<voiceNum tddtty="">817-509-3366</voiceNum>
<faxNum>817-509-3469</faxNum>
</cntPhone>
<cntAddress addressType="postal">
<delPoint>501 W. Felix St., Bldg. 23</delPoint>
<city>Fort Worth</city>
<adminArea>TX</adminArea>
<postCode>76115</postCode>
<country>US</country>
<eMailAdd>Steve.Nechero@ftw.usda.gov</eMailAdd>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="007"/>
</role>
<displayName>Steve Nechero</displayName>
</idPoC>
<dataChar>
<CharSetCd value="004"/>
</dataChar>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-95.140200</westBL>
<eastBL Sync="TRUE">-94.961650</eastBL>
<northBL Sync="TRUE">46.368769</northBL>
<southBL Sync="TRUE">46.146055</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
<idPoC>
<rpIndName>ACPF Support</rpIndName>
<rpOrgName>ACPF National Hub</rpOrgName>
<rpPosName>Database Manager</rpPosName>
<role>
<RoleCd value="007"/>
</role>
<rpCntInfo>
<cntAddress addressType="both">
<delPoint>613 Morrill Rd, 218 Durham Center</delPoint>
<city>Ames</city>
<adminArea>Iowa</adminArea>
<postCode>50011</postCode>
<eMailAdd>acpfsupport@iastate.edu</eMailAdd>
<country>US</country>
</cntAddress>
</rpCntInfo>
<editorSave>False</editorSave>
<displayName>ACPF Support</displayName>
</idPoC>
<tpCat>
<TopicCatCd value="003"/>
</tpCat>
</dataIdInfo>
<dqInfo>
<dqScope>
<scpLvl>
<ScopeCd value="005"/>
</scpLvl>
</dqScope>
<report dimension="" type="DQTopConsis">
<evalMethDesc>There are no unclosed polygons, intersections without nodes, or polygons without labels or with more than one label. The ArcGIS geodatabase topology tools were used to make corrections using 11 rules including no gaps, no overlaps, identify cooresponding linework for every polygon boundary, and remove duplicate lines with the same beginning and ending nodes.</evalMethDesc>
</report>
<report dimension="" type="DQConcConsis">
<measDesc>There are no unclosed polygons, intersections without nodes, or polygons without labels or with more than one label. The ArcGIS geodatabase topology tools were used to make corrections using 11 rules including no gaps, no overlaps, identify cooresponding linework for every polygon boundary, and remove duplicate lines with the same beginning and ending nodes.</measDesc>
</report>
<report dimension="" type="DQCompOm">
<measDesc>All fields for all polygons are attributed. Some polygons in the Ncontrb_a field might have a 0 value.</measDesc>
</report>
<report dimension="" type="DQQuanAttAcc">
<measDesc>10% of the attributes were visually reviewed. The accuracy of this data is dependent on the level of detail of the source material and the interpretation procedures for capturing that source.</measDesc>
</report>
<report dimension="horizontal" type="DQAbsExtPosAcc">
<measDesc>The WBD was produced using Digital Raster Graphics (DRG's) as the source map. Data completeness for DRG files reflects content of the source graphic and may therefore be reflected in the completeness and accuracy of the WBD. The map was digitized from USGS 1:24,000-scale digital raster graphic base maps, with an inherited error of +/- 40 feet according to the USGS National Map Accuracy Standards. It is estimated that any errors detected were less than 10%. It should also be noted that while general rules of hydrology were used (i.e. natural water flow is downhill), the locations of boundaries is still somewhat subjective as the 1:24,000-scale DRG's do not always provide enough information for identifying the location of the boundaries.</measDesc>
</report>
<dataLineage>
<dataSource type="">
<srcDesc>hydrologic unit map delineation and digitize map</srcDesc>
<srcMedName>
<MedNameCd value="015"/>
</srcMedName>
<srcScale>
<rfDenom>24000</rfDenom>
</srcScale>
<srcCitatn>
<resTitle>Digital Raster Graphic</resTitle>
<resAltTitle>USGSDRG</resAltTitle>
<date>
<pubDate date="unknown"/>
</date>
<citRespParty>
<rpOrgName>U.S. Geological Survey</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<citOnlineRes>
<linkage>http://datagateway.nrcs.usda.gov</linkage>
</citOnlineRes>
</srcCitatn>
<srcExt>
<exDesc>map delineation</exDesc>
<tempEle>
<TempExtent>
<exTemp>
<TM_Instant>
<tmPosition>1999-01-01</tmPosition>
</TM_Instant>
</exTemp>
</TempExtent>
</tempEle>
</srcExt>
</dataSource>
</dataLineage>
</dqInfo>
<eainfo>
<detailed Name="bndMetaTemplate">
<enttyp>
<enttypl Sync="TRUE">bndMetaTemplate</enttypl>
<enttypd>identifies watershed boundaries (as polygons)</enttypd>
<enttypds>n/a</enttypds>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">1</enttypc>
</enttyp>
<attr>
<attrlabl>OBJECTID</attrlabl>
<attrdef>Internal feature number.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Sequential unique whole numbers that are automatically generated in SDE.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>HUC_12</attrlabl>
<attrdef>Twelve Digit Hydrologic Unit Code: This field provides a unique 12-digit code for each subwatershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<rdom>
<rdommin>010000000000</rdommin>
<rdommax>999999999999</rdommax>
</rdom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated/changed by state stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">HUC_12</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HUC_8</attrlabl>
<attalias Sync="TRUE">HUC_8</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HUC_10</attrlabl>
<attalias Sync="TRUE">HUC_10</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>ACRES</attrlabl>
<attrdef>Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. The "Acres" field was calculated from the "Area" field.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<rdom>
<rdommin>0</rdommin>
<rdommax>2500000</rdommax>
<attrunit>Acres</attrunit>
</rdom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Calculated in Geographic NAD83.</attrva>
<attrvae>Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. The "Acres" field was calculated from the "Area" field.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">ACRES</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>HU_12_DS</attrlabl>
<attrdef>Sixth Level Downstream Hydrologic Unit Code: This field was populated with the 12-digit code of the 6th level hydrologic unit that is receiving the majority of the flow from the subwatershed. Outlets created by ditching or other artificial drainage were not considered for this field. If a HU flows into an ocean or the Gulf of Mexico it was populate with "OCEAN" and if a HU flows into one of the Great Lakes the term "LAKE" was used. If a HU flows across international borders, "CANADA" or "MEXICO" was used depending on which country the HU drains into. If an HU is a closed basin, this field was populated with the term "CLOSED BASIN".</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<rdom>
<rdommin>010000000000</rdommin>
<rdommax>999999999999</rdommax>
</rdom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated manually by data stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">HU_12_DS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">12</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HU_10_DS</attrlabl>
<attalias Sync="TRUE">HU_10_DS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HU_10_NAME</attrlabl>
<attalias Sync="TRUE">HU_10_NAME</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HU_10_MOD</attrlabl>
<attalias Sync="TRUE">HU_10_MOD</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">HU_10_TYPE</attrlabl>
<attalias Sync="TRUE">HU_10_TYPE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">1</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>HU_12_NAME</attrlabl>
<attrdef>Sixth Level Hydrologic Unit Name: Officially recognized names were used in this field. This field was populated by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the subwatershed was used only once within a 4th level unit.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<udom>Character String</udom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated manually by data stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">HU_12_NAME</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">80</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>HU_12_MOD</attrlabl>
<attrdef>Sixth Level Hydrologic Unit Modifications: This field identifies any type of man-made modification(s) to natural overland flow that alters the location of the hydrologic unit boundary for a 12-digit subwatershed. One or more of the following abbreviations was chosen for this field.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<edom>
<edomv>SC</edomv>
<edomvd>Stormwater Canal or Drainage Canal</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>ID</edomv>
<edomvd>Irrigation Ditch</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>IT</edomv>
<edomvd>Interbasin Transfer</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>BC</edomv>
<edomvd>Barge Canal or Navigation Canal</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>SD</edomv>
<edomvd>Stormwater Ditch</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>PD</edomv>
<edomvd>Pipe Diversion</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>CD</edomv>
<edomvd>Channel Diversion</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>NC</edomv>
<edomvd>Noncontributing Area</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>KA</edomv>
<edomvd>Karst</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>LE</edomv>
<edomvd>Levee</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>NM</edomv>
<edomvd>No Modifications</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>OC</edomv>
<edomvd>Overflow Channel or Flume</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>DM</edomv>
<edomvd>Dam at outlet or HU boundary</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>GC</edomv>
<edomvd>General Canal/Ditch</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>PS</edomv>
<edomvd>Pumping Station</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>DD</edomv>
<edomvd>Drainage Ditch</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>SI</edomv>
<edomvd>Siphon</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>AD</edomv>
<edomvd>Aqueduct</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>RS</edomv>
<edomvd>Reservoir</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>TF</edomv>
<edomvd>Transportation Feature (road, railroad, docks etc.)</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>GF</edomv>
<edomvd>Ground-Water Flow</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>MA</edomv>
<edomvd>Mining Activity</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>UA</edomv>
<edomvd>Urban Area</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>GL</edomv>
<edomvd>Glacier</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>IF</edomv>
<edomvd>Ice Field</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>OF</edomv>
<edomvd>Overbank Flow</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>OT</edomv>
<edomvd>Other</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated manually by data stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">HU_12_MOD</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>HU_12_TYPE</attrlabl>
<attrdef>Sixth Level Hydrologic Unit Type: This field was populated with the hydrologic unit type from the list provided that most closely identifies the subwatershed.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<edom>
<edomv>S</edomv>
<edomvd>"Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units.</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</edomvds>
</edom>
<edom>
<edomv>C</edomv>
<edomvd>"Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point.</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>F</edomv>
<edomvd>"Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water areas at or near the outlet(s).</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>W</edomv>
<edomvd>"Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies, harbors.</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>I</edomv>
<edomvd>"Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face.</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
<edom>
<edomv>U</edomv>
<edomvd>"Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed.</edomvd>
<edomvds>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3</edomvds>
</edom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated manually by data stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">HU_12_TYPE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">1</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>STATES</attrlabl>
<attrdef>The "States" field includes the names of all state(s) that the subwatershed falls within. The 2-digit postal abbreviation in upper case and in alphabetical order was used, separated with a comma.</attrdef>
<attrdefs>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</attrdefs>
<attrdomv>
<udom>Character String</udom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrva>Unknown</attrva>
<attrvae>Populated manually by data stewards.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">STATES</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">META_ID</attrlabl>
<attalias Sync="TRUE">META_ID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>SHAPE</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Coordinates defining the features.</udom>
</attrdomv>
<begdatea>1990s</begdatea>
<enddatea>Ongoing</enddatea>
<attrvai>
<attrvae>Edited by state stewards.</attrvae>
<attrva>Generally +/- 13 meters of real world coordinates.</attrva>
</attrvai>
<attrmfrq>As needed</attrmfrq>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">AreaPctMean</attrlabl>
<attalias Sync="TRUE">AreaPctMean</attalias>
<attrtype Sync="TRUE">Single</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>SHAPE_Length</attrlabl>
<attrdef>Length of feature in internal units.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Positive real numbers that are automatically generated.</udom>
</attrdomv>
<attalias Sync="TRUE">Shape_Length</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>SHAPE_Area</attrlabl>
<attrdef>Area of feature in internal units squared.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Positive real numbers that are automatically generated.</udom>
</attrdomv>
<attalias Sync="TRUE">Shape_Area</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
<overview>
<eaover>Each hydrologic unit polygon has associated attributes stored in tabular format. An attribute, also called a field or column, is defined by name, type, size, and valid values. For this layer, these attributes are
the Hydrologic Unit Codes, Names, Acreage, States crossed, non-contributing area, Downstream unit code, Type, and Modification. ftp://ftp-fc.sc.egov.usda.gov/NCGC/products/watershed/hu-standards.pdf</eaover>
<eadetcit>Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3.</eadetcit>
</overview>
</eainfo>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="102039"/>
<idCodeSpace Sync="TRUE">Esri</idCodeSpace>
<idVersion Sync="TRUE">8.1.2</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="bndMetaTemplate">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">1</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<spdoinfo>
<ptvctinf>
<esriterm Name="bndMetaTemplate">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">1</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<mdDateSt Sync="TRUE">20230322</mdDateSt>
<mdContact>
<rpIndName>ACPF Support</rpIndName>
<rpOrgName>ACPF National Hub</rpOrgName>
<rpPosName>Database Manager</rpPosName>
<role>
<RoleCd value="007"/>
</role>
<rpCntInfo>
<cntAddress addressType="both">
<delPoint>613 Morrill Rd, 218 Durham Center</delPoint>
<city>Ames</city>
<adminArea>Iowa</adminArea>
<postCode>50011</postCode>
<eMailAdd>acpfsupport@iastate.edu</eMailAdd>
<country>US</country>
</cntAddress>
</rpCntInfo>
</mdContact>
</metadata>
